300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
Diagnostic trouble codes (DTC's) which have bee stored due to testing or the disconnection of lines must be erased from the diagnostic trouble code
memory at the end of testing.
087
Hand-Held Tester (HHT)
094
Multiplexer, 965 589 00 40
X11/4
Data link connector
Adapter cable, 965 589 00 50 00 (not shown)
16-pole Data Link Connector (X11/4)
Model 163
1. Connect HHT with Multiplexer (094) and Adapter cable (107) attached, to Data link connector X11/4 (located in passenger compartment).
2. Turn Ignition: ON
3. According to instructions in HHT display:
a) Readout DTC memory/erase
b) Readout Actual values
c) Perform Activations
d) Program control modules
4. Disconnect HHT.
[i]
Observe all system specific instructions listed in the "Preparation for Test" section of each Test Program.
Diagnostic trouble codes (DTC's) which have been stored due to testing or the disconnection of line must be erased from the diagnostic trouble code
memory at the end of testing.