300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
3
Screw out screw (arrow at rear) on finisher (4) and remove finisher toward front.
4
Unscrew terminal strip (5) and handle (6) from cushion frame.
5
Unhook rubber tensioners (arrows) on cushion frame.
6
Expose cable to belt buckle (2 Ohms clips).
7
Screw out screws (arrows).
Tightening torque: 10 Nm.
8
Screw out screws (arrows).
Tightening torque: 10 Nm.