300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
/l6-3.5l_dsl_turbo_(603.971)/Page-1245011.png)
39. Insert straight pins (20), then introduce cam insert (6) into the straight pins with the cast direction of rotation arrow (arrow) facing upwards.
40. Fit pressure plate (3) with the ground face pointing toward cam insert (6).
Fit O-rings (26b) onto the pressure plate with grease.
41. Insert bearing flange in the pump housing and attach with the hexagon bolts (25). Tightening torque 30-35 Nm.
42. Insert new O-ring (21), then fit on fluid reservoir (35) and attach with bolts (36). Tightening torque 8 Nm.