300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
-
With steering gear removed, unscrew P-valve (Y10). Absolute cleanliness is required.
-
Replace the seal (Y10/1).
-
Torque to 70 Nm on installation.
Disassembling and Assembling Pitman Arm Shaft/Bearing Cover
Disassembling and Assembling Pitman Arm Shaft/Bearing Cover
Preceding work:
-
Remove steering gear.
-
Remove and check bearing cover with pitman arm shaft.
-
For the tools needed to perform this procedure, See: Tools and Equipment
Disassembling and Assembling::