300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
4
Fit cap (12).
CAUTION: Risk of water penetration!
5
Pull out valve (2) using a hook until it engages in the assembly position.
6
Hook control pressure cable with vacuum element into transmission and install. Ensure that it is correctly engaged!
Checking Upshift Delay
1
Connect the two vacuum lines to upshift delay switchover valve (Y3/3). Upshift delay is activated.
2
Check on a road test in selector lever position "D" and low throttle.
NOTE:
-
Turn adjusting screw (11) clockwise: shift point at lower speed.
-
Turn adjusting screw (11) anti-clockwise shift point at higher speed.