300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
4 Unclip holddown at the rear and pull out of wind deflector in rear direction.
5 Manually pull out wind deflector in center first.
6 Push wind deflector downwards similtaneously and carefully pushing bearing at left and then at the right out of shaft by means of a plastic wedge.
7 Remove wind deflector toward the rear.
Installation
8 Insert wind deflector into recess and lightly knock with ball of thumb against bearing for proper location in clips. Make sure that the center bearing
also engages perfectly.