300SE (140.032) L6-3.2L (104.990) (1992)
3
Pull panelling upward out of panel on main frame member inside.
4
Screw out bolt on belt end fitting.
5
Pull belt out of B-pillar panelling and lay panelling to side.
6
Insert retaining clip in top of panelling.
7
Guide belt end fitting through opening in panelling.
8
Insert panelling into channel in panel for main frame member inside.
9
Insert sliding piece (arrow) on guide bolt for belt height adjustment.
10
Clip in panelling at top and clip into insert clips on B-pillar at sides.