300SE (140.032) L6-3.2L (104.990) (1992)
Power Door Lock Actuator: Service and Repair
Remove/Install Actuator in Front Door
Door trim panel
Remove. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement
Pneumatic line (6)
Lever off.
Sliding sleeve (16)
Push back.
Shift rod (14)
Press out.
Bolt (12)
Unscrew and remove.
Actuator
Unhook.
Actuator
Check pneumatic function. See: Pneumatic System/Testing and Inspection
Actuator
Move to installation position.
Push sliding sleeve (16) fully back and pull out shift rod retainer (15) until it locks.
Actuator
Install in the reverse sequence.