300SE (140.032) L6-3.2L (104.990) (1992)
Seat Back: Service and Repair
Replacement of Pompadour Pocket
Replacement of Pompadour Pocket on Rear Panel of Front Seats Backrest
Preliminary work:
Tensioner removed.
Rear panel (1)
lay down with cloth side on a suitable surface.
Plastic weld beads (arrows)
separate with chisel.
Pompadour pocket (2)
remove from tensioner (1)
Pompadour pocket (2)
place on rear panel (1) and secure to rear panel with screw, part no. 201 990 07 36.
NOTE: When replacing the pompadour pocket (2) shorten the plastic weld bolts to 4 mm overall length
in advance e.g. grinding off.