300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-669003.png)
8.
Route cable away from exhaust manifold along transmission oil cooler line using cable ties (arrow, Figure 4).
9.
Continue routing the cable, using cable ties, along the alternator wiring harness.
10.
Open towing eye flap in bumper cover. Route cable forward through opening for towing eye flap.
11.
Insert cable plug through slot in towing eye flap and reinstall towing eye flap in bumper cover (Figure 5).
12.
The cable may now be easily accessed for winter use or alternately reinserted through the slot in the towing eye flap for storage when not needed
(Figure 6).
13.
Close coolant drain plug.
Tightening torque: 30 N-m
14.
Reinstall encapsulation panels.
15.
Test coolant for sufficient antifreeze protection, refill and bleed cooling system. Pressure test system for leaks.
