300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-795004.png)
2.
Remove timing chain tensioner. (see SMS, models 201, 124 and 140: Engines 601, 602, 603, Mechanical III, Job No. 05-310). (see SMS, models
124, 210: Engines 604, 605, 606, Mechanical II, Job No. AR05.10-7800HA).
3.
Disconnect and partially unscrew all glow plugs.
4.
Remove valve cover.
Separating timing chain
As shown on engines 601 to 603
5.
Attach retainer (01, Figure 1) Special Tool 602 589 01 40 00 on engines 601 - 603 or Special Tool 602 589 00 40 00 on engines 604 - 606, to
cylinder head with bolts as shown (arrows, Figure 1).
6.
Cover exposed timing chain case with a clean shop towel.
7.
Install link remover mandrel (02, Figure 2) Special Tool 602 589 04 63 00 along with link removal pin, Special Tool 602 589 04 63 01 into link
removal tool (03, Figure 2) Special Tool 602 589 02 33 00.
