300SE (140.032) L6-3.2L (104.990) (1992)
Catalytic Converter: Service and Repair
Removing And Installing Three Way Catalytic Converter Or Front Exhaust System
Part 1
Part 2
1
Replace self-locking nuts and gaskets. Ensure gaskets and flanges are correctly installed
-
Use emery cloth to clean off combustion and corrosion residues at connection points if necessary
2
Disconnect connectors (arrows) for oxygen sensor
3
Replace rivet nuts in exhaust manifold
-
Replace if necessary
4
Remove threaded plate
CAUTION: Installation: Pay attention to installation of threaded plate
5
Install in reverse sequence