300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-1123001.png)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature Sensor Replacement
1. Unplug electrical connector at intake air temperature sensor (B17/7).
2. Check O-ring, replace if necessary.
3. Turn intake air temperature sensor (B17/7) to left and remove it.
4. Install in reverse order.
5. Extract and reset fuel injection control module diagnostic trouble code memory.
NOTE: Stored trouble codes may be caused by detached cables or repair work.
