300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-1231001.png)
Knock Sensor: Service and Repair
Knock Sensor Replacement
1. Remove bolts (arrows).
2. Unplug connector at ignition control module.
3. Unclip protective hose for cables.
NOTE: The cables of both knock sensors (A16) are combined in the protective hose (corrugated hose). They can only be replaced as a unit.
4. Install in reverse order, tighten knock sensors to 20 Nm (14.8 ft lb).
