300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-99001.png)
Technical Service Bulletin # WORK284A
Date: 930501
Vehicle - Several Production Changes
Group: 00
Number: 284a
Work Instructions
Date: May 1993
General Information
SUBJECT:
MODEL 140 VALUE COMMITMENT PROGRAM
A.
ALL MODEL 140, REPLACEMENT OF FRONT LOWER CONTROL ARM REAR BUSHINGS WITH HYDRAULIC BUSHINGS
B.
MODELS 140.042/051/057 (MODEL YEAR 1992 CALIFORNIA ONLY) DIAGNOSTIC MODULE, DIAGNOSTIC TROUBLE CODE 26
C.
MODEL 140.057 (MODEL YEAR 1992) LH-SFI CONTROL MODULE, DIAGNOSTIC TROUBLE CODES 19, 51
D.
ALL MODEL 140, REPLACEMENT OF REAR VANITY MIRRORS
E.
ALL MODEL 140, REPLACEMENT OF EXTERIOR MIRROR FOLD BACK DRIVE MOTOR
A) Control Arm Bushing R & R
A.
ALL MODEL 140, REPLACEMENT OF FRONT LOWER CONTROL ARM REAR BUSHINGS WITH HYDRAULIC BUSHINGS
As of June 1992 production (model year 1993), only hydraulic bushings (B, Figure 1) are installed in the rear mount of the front lower control arm.
A.
Solid rubber bushing (4c) with large washer (4d) up to June 1992.
B.
Hydraulic bushing (4g) as of June 1992 (model year 1993).
Effective Serial Number
Model
As of Chassis End Number
140
A-086004
Note:
