300SE (140.032) L6-3.2L (104.990) (1992)
Seat Belt Height Adjuster: Service and Repair
Replacement of Automatic Belt Height Adjusters on Driver's or Front Passenger Seat
Removal
Seat
move forward and up at rear.
Cap (4)
pull off toward rear.
Clip (5)
turn approx. 90° and remove.
End of control cable
remove from fixed mount (3) by pressing catch together.
Seat
move toward rear and up at front.
Footmat
lift together with damping element.
Screw (1) on control cable mount (2)
screw out.
Seat
loosen at front and lift, expose control cable and remove.
Seat
move forward.
Entry strips on entry
remove.
Edge protector on B-pillar
press off.
2 screws (6) on B-pillar covering at bottom (7)
screw out and remove covering upward.
Clips on B-pillar covering (8)
press in with screwdriver (arrows) and remove covering downward.
Control cable guide (9)
remove with screwdriver (arrows).
Control cable