300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-304001.png)
Manifold Pressure/Vacuum Sensor: Description and Operation
Intake Manifold Pressure Sensor In EZL/AKR Control Unit
PURPOSE AND LOCATION
The pressure sensor, located in the EZK/AKR control unit (N1/3), detects the intake manifold pressure. This signal is sent from the EZK/AKR
control unit to the LH control unit via the controller area network (CAN).
This information is used for the following:
^
Engine start-up to about 600 RPM
^
"Limp home mode" when air mass sensor is defective
