300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-348002.png)
d = Period for one crankshaft rotation
The crankshaft position is recognized from the voltage signals which are produced. The segment front edge generates a negative voltage signal.
The segment rear edge generates a positive voltage signal. Engine speed is determined by measuring the period (d) which is equal to one
crankshaft revolution.
SIGNAL
This AC voltage signal is used by the EZL/AKR control unit and transmitted via the controller area network (CAN) to the LH control unit.
