300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-2116004.png)
brake lines.
5.
On vehicles with ABS (anti-lock brake system), remove RPM sensor from steering knuckle.
6.
On all models, remove front wheel hub.
7.
Remove bracket from cover plate brake lines.
8.
Using a suitable tool, remove guide joint nut and joint from steering knuckle.
9.
Loosen supporting joint nut.
10.
Swivel upper steering knuckle slightly outward, and force supporting joint from lower control arm.
11.
Remove steering knuckle.
12.
Remove cover plate from steering knuckle, if necessary.
13.
Reverse procedure to install.
300SD & SL 1992 300SE
1.
Raise and support vehicle, then remove front wheel(s).
2.
Remove front wheel hub as outlined previously.
3.
On models equipped with ABS, remove speed sensor from steering knuckle.
4.
On all models, remove brake plate attaching bolts, then remove.
5.
Remove front springs.
6.
Remove track rod arm to steering knuckle attaching bolts.
7.
On models equipped with ADS system, remove wheel acceleration sensor from steering knuckle.
8.
On all models, remove damper strut attaching nuts and bolts.
9.
Remove ball joint to steering knuckle attaching bolt and nut, then remove steering knuckle.
10.
Reverse to install.
