300SE (140.032) L6-3.2L (104.990) (1992)
27. Press in radial seal ring (28) as far as the stop with a suitable mandrel.
28. Press spacer ring (27) into the housing (4) with groove facing seal.
29. Press radial seal ring (13) into the bearing flange (14) using a suitable mandrel (030). Fit on O-ring.
Carefully insert drive shalt into bearing flange.
30. Fit thrust washer (12) and eccentric (15a) onto the drive shaft. Secure eccentric with pin (17).
Knock pin as far as the stop.
31. Push oiled sleeve (15b) over the eccentric (15a).