300SE (140.032) L6-3.2L (104.990) (1992)
1
Attach both suction cups to rear window.
2
Center rear window in window cutout with help from second mechanic and align so that strips of tape coincide.
3
Set rear window on glue bead and press down until it makes contact with rubber window spacers.
NOTE: On model 210.02 with tailgate the window must make contact with the cover.
NOTE: Open side window in car to prevent the window from being pressed outwards by the air pressure when a door is closed.
NOTE: Install rear window within 5 minutes after applying glue before adhesive force of glue begins to decrease.
NOTE: The curing time is approx. 1 hour measured from the time the rear window is installed.