300SE (140.032) L6-3.2L (104.990) (1992)
Rear Door Window Glass: Service and Repair
Replace Crank Operated Window In Rear Door
Preliminary work:
Door liner on rear door removed. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal
and Replacement
Crank window (1)
open.
Vapor seal on interior door panel
pull off.
Interior sealing channel (2) on door shaft
remove.
Exterior molding (3) and sealing channel (4) on door shaft
remove.
Window guide channel (6)
remove.
Cover (5) on inside of window stay
remove.
Screw (1) on inside of window stay
screw out (3 each).
Screw (8) at top of window stay
screw out while pulling door sealing frame out in area of stay.
Screw (9) at bottom of window stay
screw out, 10 mm.
Window stay (10)
remove toward front.
Retaining strap (1) on slider (12)