300SE (140.032) L6-3.2L (104.990) (1992)
2
Glue on strips of tape (arrows), cut through at top of windshield and remove windshield.
3
Remove protective foil from retaining strips.
Installing Windshield
References (WH), Commercially available tools
1
Attach both suction cups to window.
2
Center window in window cut out with aid of second mechanic and move so that strips of tape coincide.
3
Position window on glue bead and press down until it makes contact with the rubber windshield spacers.
NOTE: Open side window in car to prevent the windshield from being pressed outwards by the air pressure when a door is closed.
NOTE: Install windshield within 5 minutes before adhesive force of glue begins to decrease.
NOTE: The curing time is approx. 1 hour measured from the time the window is installed.
Remove/Install Windshield Molding
Removal and Installation Of Windshield Molding
Preliminary work:
Panelling on A-pillar removed. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair
NOTE: Remove panelling on A-pillar on one side only.
Molding
Press off with plastic wedge.