300SEL (126.025) L6-3.0L (103.981) (1988)
9 Position holddown at left and right in clips.
10 Install chrome-plated rail in cutout at front, as well as sliding rail left and right.
Adjustment
11 If the wind deflector wipes against recess on sliding roof when opening or closing, the angle of tilt can be pertinently changed by making
readjustments on adjusting screw.
NOTE: If the wind deflector rattles in center bearing, hold deflector in place at its outer bearings, pull out of center bearing in center range and
slightly bend in upward direction. The resulting increased tension will prevent rattling.