300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-524001.png)
Camshaft: Testing and Inspection
Checking Camshaft Basic Position
-
Remove cylinder head cover
-
Rotate crankshaft until TDC marking on vibration damper is aligned with TDC pointer (arrow).
-
The setting hole (21) or setting pin in camshaft must be opposite cast marking (20) on first camshaft bearing bracket (arrow).
-
The hole (4) (oval) with arrow (6) must be aligned with locating pin (3) in camshaft.
Special Tool
