300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-675004.png)
13. Insert plate (arrow) into the moving jaw (02).
14. Fit web (arrow) onto both rollers on the rivet link.
NOTE: Rivet heads of the rivet link pins must be guided in the slot (C).
15. Screw in spindle (04) until a firm resistance is felt.
NOTE: When screwing in, ensure that the pins of the rivet link can be guided into the holes of the plate.
16. Take off rivet tool and change over the moving jaw (02) to the rivet profile (D).
17. Position rivet tool exactly over center of pin. Rivet pins of the rivet link individually by tightening the spindle (04) to approx. 25 Nm.
