300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-687003.png)
Removing Driver
Insertion Sleeve
Installation Note: Steel driver with 20 mm diameter flange must be fitted with M7 x 26 mm bolt, and aluminium driver with 21.5 mm diameter
flange with M8 x 29 mm bolt.
Installation Note: The groove (arrow) in the driver (11) must engage the pin in the camshaft.
Driver
1st version
2nd version
Material
Aluminum
Steel
Bolt Size
M8x29
M7x26
Torque
21 Nm(15.5 ft lbs)
16 Nm(12 ft lbs)
Sleeve #
103 589 00 14 00
103 589 0114 00
collar diameter 21.5 mm
20 mm
