300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-1355001.png)
Control Pressure Cable: Service and Repair
Removing, Installing And Adjusting Control Pressure With Vacuum Element, Vehicles With Program Selector Switch
98
Control pressure cable
Loosen detent on transmission and disengage connecting rod. During installation, remove oil pan to permit engagement of connecting rod. Adjust
control pressure cable according to item 7-9.
2
Check valve
Installed in engine compartment left, at component compartment wall.
3
Intake pipe
7
Vacuum element
Integrated in control pressure cable.
9
Vacuum reservoir
Behind plastic cover, at left front wheelhouse (models 124, 126) at right front wheelhouse (model 107)
11
Accelerator pedal
46
Control pressure valve
78
Guide lever
98
Control pressure cable
S15 Switch 2nd drive program
Shift pattern included
S30/2 Kickdown switch
Y3 Switchover valve, automatic transmission
Y4 Electric switchover valve
Engine compartment left, at component compartment wall (models 124 and 126), wheelhouse left center (model 107)
