300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-1395002.png)
3 On this version, mark flexible coupling (arrow) in relation to three-legged flange of propeller shaft.
Propeller shafts with vibration damper
4 On this version, an identification mark on three-legged flange (hump) and on vibration damper (20) (vulcanized arrow) is in place.
Note: The installation position is correct, when the arrow of vibration damper (20) points to hump of three legged flange (arrows).
Installation note: Renew self-locking hex. nuts. Tightening torque M10 = 40 Nm, M12 = 60 Nm.
Mount soft pull-push flexible coupling (on vehicles engine 103) according to lettering "DIESE SEITE ZUR GELENKWELLE" (THIS SIDE
TOWARD PROPELLER SHAFT).
