mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Windshield Wiper Arm/Motor/Harness - Updated|Page 9180 > < Wipers/Washers - Wipers Chattering/Noisy|Page 9174
Page 1
background image

Technical Service Bulletin # 54_017

Date: 880601

Windshield Wiper Arm/Motor/Harness - Updated

TO:

OUR MERCEDES-BENZ PASSENGER CAR DEALERS

DATE:

June 1988
REF.. NO. MBNA 54/17, 82/30

SUBJECT:

A. IMPROVED WINDSHIELD WIPER ARM AND BLADE MODEL 124 AND 201 WITH EXTENDED REACH WIPER ONLY
B.

MODIFIED ELECTRICAL CONNECTOR FOR WINDSHIELD WIPER MOTOR MODEL 124 MODEL YEAR 1986

A. Improved Windshield Wiper Arm/Blade (Extended Reach Only)

As of the production dates listed in the table below, an improved windshield wiper arm and blade assembly is installed in production. The new wiper arm
and blade assembly reduces the amount of pressure the rubber blade exerts against the windshield at the outer most point of the swept area. This will
reduce the possibility of windshield scratches in this area.

Effective Serial Number

Model

Production Date

Cbassis End Number

124

January 1988

Not available

201

May 1987

F 363309

The new wiper arm is shorter than the previous version while the wiper blade is the same overall length, but the connection point to the wiper arm has
been correspondingly moved closer to the wiper gearhead. The wiper refill remains unchanged.

The new wiper arm and wiper blade can be retrofitted to earlier production vehicles (start of production for model 124 and as of January 1985 for model
201 - extended reach wiper introduction) only as a set.

When ordering, ensure that the manufacturer of the new wiper arm and of the wiper gearhead are the same. This is necessary because the flat surface
machined in the connection shaft (between gearhead and arm) is in a different location depending upon the manufacturer.

Bosch - flat surface faces the windshield SWF - flat surface faces away from the windshield

The blades are interchangeable within a model group.

When retrofitting the new set in place of a previous version, an additional (snap-on) plastic cover is necessary. This cover will fit either the Bosch or
SWF arm of either model group.

When replacing windshields on vehicles produced prior to May 1987 (201) and January 1988 (124) due to customer complaints of windshield scratches,
the new version wiper arm, blade and cover should be installed.

Parts Information

Model

Part Name

Part Number

Bosch

SWF

201

Wiper arm

201 820 54 44

201 820 52 44

Wiper blade

201 820 11 45

201 820 10 45

124

Wiper arm

124 820 36 44

124 820 38 44

Wiper blade

124 820 08 45

124 820 09 45

Both

Cover

124 824 03 49

In case of Warranty:

Time Allowance

Refer to the latest Time Guide microfiche.

Damage Code

67001 10 Windshield; scratched

Windshield Wiper Arm/Motor/Harness - Updated|Page 9180 > < Wipers/Washers - Wipers Chattering/Noisy|Page 9174