300SL (129.061) L6-3.0L (104.981) (1991)
Map Pocket Lock Actuator: Service and Repair
Rear Pocket Actuator
Preliminary operation:
Checking interior central locking for leaks. See: Body Control Systems/Testing and Inspection/Component Tests and General Diagnostics
NOTE: Rear door pocket element eliminated as of 09/95
Door panelling
Remove. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement
Door pocket (f)
Unscrew (12 screws).
Pneumatic line (6)
Lever off with open-end wrench (width between flats 7).
Spring clip (20)
Pull off.
Connector piece (26)
Clip out at the reversing lever (7).
Element (11 or 13)
Take out.
Pneumatic function of the element
Check. See: Locks/Power Locks/Power Door Lock Actuator/Testing and Inspection
In order to renew the link element (26)
Rebuild or renew.
Element
Install in the reverse sequence.