300SL (129.061) L6-3.0L (104.981) (1991)
Installation
NOTE: When the hydraulic cylinder is replaced install water drain cuff on new cylinder.
6
Insert hydraulic cylinder and screw in screw.
Attention: Bolt (internal hexagon) must be screwed in with screw locking compound (30 3 Nm). Screw in bolt (external hexagon)without screw
locking compound (90 5 Nm).
7
Install hydraulic lines (a, b).
8
Pull piston rod up with hook (self-made).
9
Center piston rod with special tool 129 589 04 21 00 and install bolt.
10
Check for proper function and leakage.
77-360 Remove/Install Hydraulic Cylinder For Soft Top Bow
77-360 Removal And Installation Of Hydraulic Cylinder For Soft Top Bow