300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-2683003.png)
4
Disassemble cover (slider) and remove.
Cover (slider) for head restraint shaft disassembled.
5
Insert head restraint and cover into mount on adjustment mechanism and fasten with screw.
Tightening torque: 5 Nm.
6
Continue to reinstall in opposite order.
91-053 Remove/Install Adjustment Mechanism For Head Restraint and Upper Belt Guide Fitting
91-053 Removing And Installing Adjustment Mechanism For Head Restraint And Upper Belt Guide Fitting
