300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-2712003.png)
Reinstall in opposite order. Before installing the flexible drive shaft, check the adjustment and function of the backrest (see backrest lock- inside of seat).
Installation note
The thread on the gear screw is micro-encapsulated and must be replaced after removal or coated with screw securing agent.
Tightening torque: 35 Nm.
Check function of automatic locking system (see 91-151, items 10-13).
Removal, installation
Inside of seat
1
Press off and remove trim.
