300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-2731001.png)
Technical Service Bulletin # CMP90_0731
Date: 900801
Campaign - Rear Axle Roll Bar Switch Adjustment
FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS:
GROUP I OF SPARE PARTS BINDER
TO:
OUR MERCEDES-BENZ PASSENGER CAR DEALERS
Campaign No. 90-0731
August 1990
SUBJECT:
A. ADJUSTMENT OF REAR AXLE ROLL BAR
B.
TESTING OF OPERATION MODEL 129
Enclosed is a sample copy of a letter which all allow vehicle owners will receive in the near future.
This campaign is being initiated because the following vehicles must be checked for proper adjustment of the rear axle roll bar switch, and if necessary,
be brought into compliance with manufacturer's specifications.
Effective Serial
Model
Chassis End Number
From
TO
129
000 001
5746
A.Adjustment of Rear Axle Roll BAR Switches
1.
Raise roll bar by using the switch on center console.
2.
Turn ignition key to steering lock position O.
3.
Raise vehicle on lift or with jack at the body mounting points so that both rear wheels are off the ground.
IMPORTANT! DO NOT LIFT VEHICLE ON ITS REAR AXLE CENTER PIECE, otherwise the geometry for the adjustment is incorrect! The rear
suspension must be fully extended during test and adjustment work.
When using a jack, never get beneath vehicle while it is supported by the jack only. Always use proper stands to rest vehicle on.
