300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-1118001.png)
Electronic Throttle Actuator: Service and Repair
AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection
Shown On M112 Engine
Removing, installing
1
Remove cylinder head cover trim or air filter
NOTE: Removal: Remove air filter housing or cylinder head cover trim by lifting upwards from the cylinder head covers.
Installation: Moisten the retaining rubber on the cylinder head covers and the hot film mass air flow sensor seal in the air cleaner housing lightly
with lubricant.
2
Remove hot film mass air flow sensor together with air intake pipe
