300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-1118002.png)
3
Remove crank case purge line (1/2)
4
Disconnect electrical connector (arrow)
NOTE: Pull catch backwards.
5
Remove electronic accelerator pedal actuator (M16/1)
NOTE: Undo screws (8/1).
CAUTION: Installation: Replace O-ring (8/2).
Refer to Electronic Accelerator Pedal Actuator below
6
Install in the reverse order
Electronic Accelerator Pedal Actuator
