300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-1260004.png)
10. Fit positioning piston (14) onto flanged shaft (16) into specified position, turning to the left; hold up timing chain when performing this step.
11. Fit camshaft sprocket (13) onto positioning piston (14) in specified position, turning to the right; hold up timing chain when performing this step.
12. Fit on cover with ring (12) and screw on nut (6), but do not tighten finally at this stage.
13. Engine 104.99: install camshaft sprocket of exhaust camshaft.
For tightening torques, refer to Camshaft, Lifters and Pushrods - Camshaft Gear/Socket - Service and Repair - Procedures See: Engine,
Cooling and Exhaust/Engine/Camshaft, Lifters and Push Rods/Camshaft Gear/Sprocket/Service and Repair.
14. Fit timing chain onto both camshaft sprockets, pay attention to markings.
