300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-1054001.png)
Ignition Cable: Service and Repair
Component Locations
1.
Remove the spark plug access cover from the cylinder head cover.
2.
Loosen the spark plug connectors by turning right and left and carefully lifting out.
Component Location
3.
Remove the cover from the high voltage distributor.
4.
Unplug the spark plug wires from the distributor cap and remove the wires.
NOTE: Observe ignition wire routing.
5.
Reinstall the ignition wires in reverse manner.
