300SL (129.061) L6-3.0L (104.981) (1991)
20
Bolt steering gear onto longitudinal frame member
CAUTION: On vehicles with adjustable steering column, push lower steering shaft into steering coupling
21
Lower engine and install engine mounts
22
Install ground strap on longitudinal frame member
23
Install bolt (25a) in steering coupling
24
Screw on high-pressure stretch hose (30i)
-
Model 208 with engine 112, 113: Apply the box wrench insert from the front with extension
25
Screw on return flow line (30f)
26
Install heat shield (23k)
27
Attach exhaust heat shields in the steering area
28
Install exhaust connecting pipe
29
Install front exhaust pipe on the left
30
Install drag link (11) on pitman arm
31
Install tie rod (10) on pitman arm
32
Attach front left cross brace
33
Fill and bleed power steering pump
34
Check steering gear for function and leaks
NOTE: Visual inspection
35
Check ball point position
36
Check toe-in at front axle and if necessary adjust
37
Attach aerodynamic molding
38
Install lower engine compartment lining