300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-1663001.png)
Flex Plate: Technical Service Bulletins
Flex Plate Bolt - Production Update
REF. NO. 03/50
DATE: March 1996
TO: ALL MERCEDES-BENZ PASSENGER CAR DEALERS
SUBJECT:
ENGINES 104, 111, 603.97, 606
INTERNAL TORX BOLT FOR BOLTING FLEX-PLATE TO CRANKSHAFT
As of May 1995, an internal torx bolt (T55, M10 x 1), which bolts the flex-plate to the crankshaft, has been phased into production (refer to table for
engine applications). This new version bolt replaces the previous version stretch type bolts.
!CAUTION!
Always replace internal torx bolts (Figure 1) after removal, do not reuse.
Tightening torque: Preload bolt: 45 Nm
Torque angle: 45°
Parts Information
