300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
5
Cover or close oil feed bores in cylinder crankcase.
Installation
Attention!
The installation of oil spray nozzles with heavily out- of-round nozzle bore or with burr at nozzle outlet is no longer permitted.
6
Blow out oil spray nozzle with compressed air, with direction of air flow corresponding to direction of oil flow.
Do not position compressed air hose at nozzle bore.
Also do not use hard objects for cleaning nozzle bore.
7
Remove covers on oil feed bores in cylinder crankcase.
8
Position oil spray nozzle vertically to parting surface on cylinder crankcase and press on.
9
Screw-in screw (88) and tighten to 10 Nm.
10
Install oil pan.