300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
/l5-3.0l_dsl_turbo_(617.952)/Page-1183002.png)
10. Open cable straps and clip on floor shift and pull out connection cable for triggering unit.
11. Screw out mounting bolts of triggering unit with special tool.
12. Remove triggering unit through radio cutout.
Installing:
13. Screw on triggering unit.
CAUTION: Arrow on triggering unit must point in driving direction.
14. Connect red 10-pin plug connection (arrow) with cable harness.
15. Connect battery, turn ignition key to position "1" and test system by means of the RS warning lamp.
