mercedesbenz Workshop Repair Guides

Mercedes Benz 300TD Workshop Service and Auto Repair Manuals

Starting and Charging|Specifications > < Battery - Care & Handling Procedures|Page 2954
Page 1
background image

Battery: Technical Service Bulletins
Batteries - Production Change Increased CCAs

TO:

OUR MERCEDES-BENZ PASSENGER CAR DEALERS

DATE:

May, 1984                                   REF. NO. 54/28

SUBJECT:

NEW M-B BATTERIES EK 12V 72Ah AND 12V 92Ah

Since August 1983, batteries with improved cold-start performance were phased into production in vehicles with diesel engines. The new EK 12V 72Ah 
battery replaces the previous 12V 88Ah battery. The previous 12V 90Ah battery was replaced with the EK 12V 92Ah battery.

NOTE:

The 88Ah battery (part no. 001 541 80 01) continues to be valid as a replacement part.

Production Phase-In: August 1983

Model

Battery

CCA (cold cranking current)

123.123/201.122*

EK 12V 72Ah

690-SAE (420-DIN)

123.133/.153/.193

126.120

EK 12V 92Ah

740-SAE (450-DIN)

*Phase-In unspecified (190D)

In the new battery all plates of the same polarity (every other plate) are enclosed in separation envelopes, eliminating the need for the sediment space
below the plates. Short circuits between plates are therefore eliminated.

Due to the higher rating of 690 CCA (previously 88Ah/650 CCA) for the EK 12V 72Ah battery, the capacity test for this battery must be made with the
same test value as used on the 12V 88Ah battery (88Ah x 3 = 264 ampere load). The EK 12V 92Ah battery is tested in the usual manner (see
"EDUCATION FOR EXCELLENCE" booklet under BATTERY PERFORMANCE TEST).

Besides the labeling with the capacity and cold cranking amp rating (DIN), the new batteries are also identified with the letters "EK". The EK 12V 72Ah
battery is 10 lbs. lighter than the previous 88Ah battery.

Parts Information

Part Name

Part Number

Battery EK 12V 72Ah

002 541 72 01

Battery EK 12V 92Ah

002 541 86 01

Starting and Charging|Specifications > < Battery - Care & Handling Procedures|Page 2954