300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
Pin spanner 115 589 01 07 00
Socket wrench insert 126 589 02 09 00
12 Remove washer (65).
13 Unscrew combination screws (71) and pull off rear cover (70) or adapter housing.
Attention!
When removing rear transmission cover make sure that the kickdown solenoid valve is not damaged. If necessary, loosen kickdown solenoid valve and
turn slightly.
Installation
14 Mount rear cover (70) or adapter housing with new gasket.
15 Screw in combination screws (71) and tighten to 13 or 28 Nm.
NOTE: Make screws free of grease and coat with non hardening sealing compound.
16 Insert washer (65).