300TE (124.090) L6-3.0L (103.983) (1989)
/l6-3.0l_(103.983)/Page-2007002.png)
1
Remove cover (70a) of loading area.
2
Unscrew six recessed head screws (arrows) and remove cover plate.
Left Rear Accumulator
3
Disconnect pressure line (S1, S2, P4) at accumulator (4) using open box wrench.
4
Seal pressure lines and connections of accumulator with suitable plugs.
Installation Note:
Screw in banjo bolt with new solid copper sealing rings and connect pressure line (P4) so that it does not chafe on frame.
M10 x 1 = 14 Nm
M16 x 1.5 = 30 Nm
5
Unscrew three self-locking hex. nuts (arrows). Remove washers and accumulator.
Installation Note:
Replace hex. self-locking nuts, 20 Nm
