300TE 4MATIC (124.290) L6-3.0L (103.985) (1991)
-
Unscrew damper (10) of tensioning device at bracket (7) (21 Nm).
-
Unscrew bolt (16) (75 Nm).
-
Unscrew bolts (1), (3) and (4) (21 Nm).
Note: Counter-hold at nut (2) with wrench.
-
Remove strut (12).
Installation note: Apply sealant 001 989 29 20 at hole (arrow) of strut (12) at front and rear.
-
Remove bolt (16), washer (15), setting pointer (13), tensioning device (14) and sleeve (17).
-
Unscrew bolts (11) (21 Nm).
-
Swivel power steering pump (28) outward.
-
Remove bracket (19) with tensioning nut (5) and tensioning bolt (18).
-
Check tensioning device (14).
Tightening torques in Nm
Bolts of belt pulleys of fan clutch in coolant pump ................................................................................................................................................. 10
Bolt of tensioning device ......................................................................................................................................................................................... 75
Bolts of strut and bracket ........................................................................................................................................................................................ 25