300TE 4MATIC (124.290) L6-3.0L (103.985) (1991)
/l6-3.0l_(103.985)/Page-781003.png)
CAUTION: The timing chain must remain meshed when turning the camshaft gear.
9. Pull out the exposed end of the old timing chain evenly corresponding to the new timing chain being drawn in.
10. Turn crankshaft long enough for it to be possible to connect the ends of the new timing chain to the rivet link.
NOTE: Rivet link must be inserted from behind.
11. Insert thrust piece (03) as shown in drawing into the rivet tool and tighten with the screw (arrow).
NOTE: The figure 2 is stamped on the side of the thrust piece (03).
12. Insert moving jaw (02) with the figure 2 into the rivet tool as shown in the drawing.
