300TE 4MATIC (124.290) L6-3.0L (103.985) (1991)
9.
Install female connector housing (3, Figure 4) to cut off branch (a, Figure 1) of new transmission wiring harness, and connect wires as shown in
the following table:
Model
140.042/051/057
140.032
Location 1
BK
BK/GN-RD
Location 2
----
Location 3
BK/RD
BK/RD
Location 4
----
13.
Install new transmission wiring harness and make all connections. Secure the additional connectors.
14.
Reinstall driver's footwell carpet.
15.
Test drive vehicle and check all functions of the starter lock-out/backup lamp switch, shift range B or D, as well as kickdown function.
Parts Information
In Case of Warranty
Operation:
Replace start lock-out/backup lamp switch and transmission wiring harness
Damage Code
Operation Number
Time
Model(s)
27 205 47
02-5448
2.4 hrs.
A1/A2/A3/A4
Note:
Above operation number includes all steps listed in these Work Instructions. No other operation numbers are applicable with S.I. 07.4/54.