300TE 4MATIC (124.290) L6-3.0L (103.985) (1991)
/l6-3.0l_(103.985)/Page-2158002.png)
Removal, installation
Model 124.06 (convertible)
1. Unscrew self-locking polygon head bolts (36b) of cross brace (36) and remove. On the left side only.
Installation note
Replace self-locking polygon head bolts. Tightening torque 120 Nm. Torque wrench 001 589 66 21 00.
2. Unscrew self-locking hexagon nut from left rear axle switch, roll-over bar (S83/2) and remove complete.
Installation note
Replace self-locking hexagon nut. Readjust left rear axle switch, roll-over bar.
3. Detach spring link lining (6g) on spring link (arrows).
